Heathlands Cemetery, Construction of bitumen macadam footpaths

Yateley Town Council invite quotations for the following work to the paths in Heathland Cemetery, Yateley, Hampshire GU46 6AY. The works will consist of three defined areas of tarmac paths which should be priced separately and are described below. Area 1- Constructing a new footpath on the right-hand side as you enter into the cemetery from the disabled access pedestrian gate. It will enlarge the existing tarmac area by the gate then narrow down to 1.2m to form a path of 9m in length, from the end of this initial path an additional path of 15m x 1.2m will be constructed to allow grave space each side. Two additional areas 2.5m x 1.5m will be constructed in the vicinity for benches. Allow for 77m2 in total. The works to include. 1) Excavate area to construction depth. 2) Cart away all arising to an authorised tip. 3) To side and ends of excavated areas supply and place 100x22mm pressure treated timber edging secured at 1m intervals with 600x50x50 mm pressure treated timber pegs. 4) Supply and lay D.O.T Type 1 granular sub-base to a depth of 150mm on a geotextile soil stabilisation matting. 5) Supply and lay AC10mm Close Graded bitumen macadam Surface Course (EN13108-1) to a compacted depth of 40mm 6) Seal joints with hot applied bituminous joint sealant. Area 2- Construction of three new paths in main burial section to allow creation of new burial space. Paths- 43.0m x 1.2m 37.0m x 1.2m 8.0m x 1.2m The works to include. 1) Excavate area to construction depth. 2) Cart away all arising to an authorised tip. 3) To side and ends of excavated areas supply and place 100x22mm pressure treated timber edging secured at 1m intervals with 600x50x50 mm pressure treated timber pegs. 4) Supply and lay D.O.T Type 1 granular sub-base to a depth of 150mm on a geotextile soil stabilisation matting. 5) Supply and lay AC10mm Close Graded bitumen macadam Surface Course (EN13108-1) to a compacted depth of 40mm 6) Seal joints with hot applied bituminous joint sealant. Area 3 Construction of a path to connect the central road way to an existing path in the Roman Catholic/Other Denominations burial section. 9.5m x 1.2m 1) Excavate area to construction depth. 2) Cart away all arising to an authorised tip. 3) To side and ends of excavated areas supply and place 100x22mm pressure treated timber edging secured at 1m intervals with 600x50x50 mm pressure treated timber pegs. 4) Supply and lay D.O.T Type 1 granular sub-base to a depth of 150mm on a geotextile soil stabilisation matting. 5) Supply and lay AC10mm Close Graded bitumen macadam Surface Course (EN13108-1) to a compacted depth of 40mm 6) Seal joints with hot applied bituminous joint sealant. Site access is good, and areas for skips/spoil awaiting collection are available Site visits can be arranged. Quotations should be sent to office@yateley-tc.gov.uk by 6pm on Monday 27th November 2023 Any questions to be directed to Alison Blanchard, Deputy Town Clerk alison.blanchard@yateley-tc.gov.uk 01252 872198